Whenever you are aiming for vinyl sticker, there are various vinyl types you need to deal with. The right material to select depends on the surface where you are placing to it. Each one has a specific adhesive requirement and focusing on the surface first will help you to make the right choice. Some vinyl options are known for their stronger glue in the backside when compared to the rest.
The strongest of all are used to be placed on vehicles and those which are meant for outdoor uses. In some cases, using strong adhesive might pull of the paint from the surface. So, you have to be very careful with the material you choose. For that, focusing on the surface is really important.
At first clean the surface:
After doing some research, you have come across the best surface to place the stickers on. Now, it is time to take one step forward and clean the chosen area.
- Make sure to remove the grime, grease and dirt from the surface for ensuring that the vinyl stickers will last for a longer time.
- While you do clean the surface, make sure to use methylated spirit for procuring best sparkling clean results.
- Do not use any cleaner which has oil in it. This might affect the sticking part and your vinyl won’t last the longest.
Once you are sure of the surface region, you better focus on the stickers. Finding the right vinyl option is not that simple, especially when the market provides you with so many options. Be very sure to browse every individual website that you come across and the products they have. Based on the requirements, you need to finalize the ones that seem most obvious to use.
The type of adhesive used:
Adhesive is the main soul of a sticker and it will bridge the gap between the surface and the vinyl design you have chosen for your business. The difference only lies in the performance based on the adhesive type selected.
- Rubber –
This adhesive is used for removing the decals. It is not quite recommended to use in areas where the temperature might hike above 160 degrees F. The rubber adhesives are known for their higher tac and will always adhere to some surfaces as silicone, Teflon, plastic and some rubber materials.
- Elastomeric or thermoset –
If you are going for these options, then you better watch out for the surface first. For sticking up such vinyl options, you need a solvent or heat for better and strong placement.
- Acrylic adhesive –
If you are looking for a permanent sticker solution, this is it. You can purchase acrylic adhesive in pressure sensitive option. It offers lower to higher tac and will withstand temperature, rising up to 200 degrees F. Then you have pressure activated one, designed for adjustable positioning. It can also withstand the same temperature as the pressure sensitive one.
So, without wasting time, focus on the surface and the adhesive first, before finalizing on the vinyl sticker you want for your business.